CellarPro Ducted Horizontal Air Handler 1/4 Ton AH3500SCh-ECX #36246
Specs and Features
CellarPro AH3500SCh-ECX Cooling Unit (P/N 36246). CellarPro engineered the AH3500SCh-ECX ducted cooling system to provide maximum cooling power and adjustable humidity control for cellars up to 900 cubic feet. The evaporator and the condensing unit each can be ducted up to 100 equivalent feet (50 equivalent feet per duct.) Designed for internal installations, the AH3500SCh-ECX includes independent energy-efficient variable-speed EC fans with a low setting for quieter operation and a high setting for maximum power. This unit has a horizontal configuration for installations in locations with limited height and/or vertical constraints (eg above the ceiling in an attic). All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar.
- Energy-efficient EC Fans on both the cold and hot sides
- High-output EC fans provide more airflow and variable speed settings for your choice of cooling power
- Optional integrated humidifier
- Optional integrated heater
- Extra-large coils generate maximum cooling power inside the cellar
- Commercial-grade Electrofin coating
- Remote thermostat is available as an upgrade
- Energy-saver mode, quick-chill mode, and auto-defrost cycle
- Unit operates with minimal vibrations and less noise than comparable units from competitors.
- Audible and visual alarms
- Remote probe for the cellar (bottle probe) and duct adapters are included as standard equipment
- Factory-installed Expansion Valve ensures maximum operating precision and range.
- Cooling system is fully-charged with refrigerant and ready-to-use out of the box.
- Size: 37 1/5w x 18 3/5d x 19 3/10h (in) 8-inch ducting
- Weight: 206 lbs
-
Power:
-
CellarPro Air Handlers use two 110V / 60Hz plug-in power cords, as follows:
One cord for the compressor, which pulls 5.8 amps and requires a dedicated 15 amp circuit breaker One cord for the rest of the components, which pull 3.2 amps and require a dedicated 15 amp circuit breaker - Startup Amps: 30.0 Amps
- Running Amps Cord-Connected: 9.0 Amps
- Total Watts: 558 (medium fan speed)
- 1/4 Ton Nominal
-
CellarPro Air Handlers use two 110V / 60Hz plug-in power cords, as follows:
-
BTUH @ 55F
- Low Fan Speed: 2778
- Med Fan Speed: 3212
- High Fan Speed: 3354
-
Evaporator Decibels
- Low Fan Speed, Ducted: 38 dbA
- Med Fan Speed, Ducted: 44 dbA
- High Fan Speed, Ducted: 52 db
- Low Fan Speed, Ducted / Non-Ducted: 43 dbA / 56 dbA
- Med Fan Speed, Ducted / Non-Ducted: 50 dbA / 63 dbA
- High Fan Speed, Ducted / Non-Ducted: 55 dbA / 68 dbA